Every Matrice 200 includes:
The Matrice 200 can fly at a maximum speed of 51.4 mph. The Matrice can ascend at more than 11 mph and descend at nearly 7 mph. Because the Matrice’s arms unfold to nearly 35 inches, it is stable in crosswinds up to 22 mph. It can operate at up to 8,200 feet above sea level.
The Matrice 200 is engineered to IP43 standards. That means it can resist solid objects in excess of 1mm in diameter and water sprayed from all directions, even at a 60-degree angle. The Matrice, which has a hard shell body, is usable in rain. If used over sandy and dusty environments, it should be checked for and cleaned of foreign debris after use. The Matrice 200 can be flown in temperatures as low as -4F.
The Matrice 200 remote controller’s signals extend 4.3 miles. An available FPVLR range extender can increase that up to 3x. Drone Nerds recommendsprofessional installation by its trained technicians unless you have experience installing antenna hardware and firmware. Drone Nerds installation is fast and economical, involving the shipment of the remote controller only.
The DJI Go 4 flight control app is available for downloading to a smartphone or tablet. It is compatible with any operating system from iOS 9.0 or later, and Android 4.4.0 or later. The program offers Flight Autonomy and obstacle avoidance.
The included remote controller sends and receives signals up to 4.3 miles. The controller connects to a smartphone or tablet, which displays drone movement as seen through the built-in FPV camera, which always points forward. It allows toggling from FPV to camera view. The optional 7.85-inch CrystalSky monitoraids daytime viewing, with a display that’s more than four time brighter than most tablets.
Optional is the use of dual remote controllers in a master-slave arrangement. The pilot controls the drone on the master, and the camera operator controls camera movement and video/still recording on the slave. This allows for more detailed data collection during inspections. Additional remote controllers are available from Drone Nerds.
Matrice runs on twin batteries. TB50 batteries, at 4280 mAh, are standard. For longer flight time, there are optional TB55 batteries, at 7760mAh. Matrice 200 batteries must be charged to within 13 percent of each other or takeoff is blocked. If one battery fails during flight, the pilot receives a warning and should land the drone. The batteries are self-heated, allowing flight in freezing temperatures. Insulation stickers are included.
In addition to overhead infrared sensors for obstacle avoidance, Matrice 200 drones have downward and forward visioning sensors. The sensors add extra protection against striking obstacles during inspections, especially in tight or intricate environments.
Every Matrice 200 drone has an onboard software development kit. This allows development of industry-specific programs. Compatible platforms are Windows, Linux, Embedded Systems STM 32 and ROS. Mobile SDK allows development of mobile apps for Matrice 200 drones on compatble iOS or Android pones and tablets.
Available are a range of professional-level Matrice 200-compatible cameras:
The Matrice 200 can be applied to many professional uses, in addition to high-quality aerial video production and photography:
Firefighting: A Matrice mounted with a Zenmuse XT, an infrared camera that records thermal images, can detect heat sources, making it a lifesaving tool for firefighters. A Matrice so equipped can hover over a fire scene and reveal fire in walls and roofs. That helps firefighters know where to attack the blaze, step on a roof safely, and vent smoke. It also can spot hotspots that need further attention.
Search-and-rescue: An XT-equipped Matrice can scan snow from an avalanche, or the rubble left by an earthquake, fierce storm, explosion or terrorist attack for heat sources that may indicate buried survivors. It can also detect victims of a derailment or air crash who might have taken shelter in dense woods.
Police: Surveillance is conducted away from the subject, with automatic tracking of the subject as he moves. Close-up evidentiary and identification photos can be taken with zoom lenses.
Security: Thermal imaging can spot intruders hiding inside or outside buildings, and escapees hiding in dense foliage. Dogs may pick up the scent, but the Matrice can determine how far away escapees are, and it may capture images that show whether or not they are armed. The Matrice can patrol a sprawling roof, and it can monitor a perimeter day or night faster than a team in a vehicle or on foot. It also can view large areas that may mandate a tall view, such as a freight yard or prison yard.
Utility Inspections: A thermal-imaging Matrice can spot leaks in solar panels, pipelines (even if buried) and high-tension lines. Mount a thermal camera or video/still camera consecutively on a Matrice 200 to provide detailed looks at hard-to-reach locations, such as the tops of wind turbines and towers.
Telecom inspections: Inspect cell towers and relay stations without the need to endanger inspectors, who remain on the ground. Images can be shared simultaneously and recorded for later study.
Construction: Use the Matrice in most phases, beginning with aerial imaging and data gathering for making site and topographical maps, and for building 2D and 3D models. Inspections of tall structures become easier, faster and safer, and aerial photos detailing progress can be shared with regulators, decision-makers and shareholders.
Infrastructure inspections: The Matrice 200 speeds inspection of widespread networks of catenary lines for trolleys and trains. The upper stories of tall buildings, bridges, overpasses, roofs and other hard-to-access areas are more easily viewed with a zoom lens.
Agriculture: With a thermal camera-equipped Matrice 200 and a subscription to an online analytical service, farmers can map crops faster than from roads or fields. They can use the data collected to determine crop choices, seed selection, irrigation, planting sequences, the presence of diseases and treatment, and potential yields.
Mining: Aerial imaging and data collection can be used for highly accurate surveys and for building maps and 2D and 3D models. The Matrice can view hazardous and poorly accessed spots, such as high walls and muck piles. The Matrice also can be flown visually indoors, even underground.
The M200 Series drones utilize computer vision for intelligent flight modes to help more efficiently collect data. These features are available for multiple DJI sensors, enabling advanced shots such as zooming while tracking an object:
These modes are enabled by two front visual sensors, a ultrasonic and visual downward positioning system and an upper infrared sensor.
The DJI Pilot app is compatible with DJI FlightHubTM, a web-based software package allowing teams to share real-time data with offsite parties over the Internet. This includes remote emergency situation control rooms keeping track of first response teams or asset management centers inspecting global infrastructure networks. In an easy-to-use control center, DJI FlightHub lets users plan flights with multiple drones and keep track of each aircraft’s status. An offsite control room can simultaneously monitor live feeds and can remotely control gimbal and camera. The software enables managers to plan flights in advance using waypoints and dynamic geofencing.
The M200 series is designed for professionals using drones for more precise, efficient and safe aerial data collection. Examples of industry applications include:
More information about the M200’s applications can be found at www.dji.com/matrice-200-series/applications . This page will be updated as case studies are created.